Change Settings; Custom - Wireless Access Point - Panasonic TX-L42FT60B User Manual

Custom - Wireless Access Point

You can use the TV as a wireless access point and connect the network
equipment without an access point.
Confirm the PIN code, network settings of the equipment before starting
●
setup. For details, read the manual of the equipment.
1. Display the menu with
2. Select Network
with / / /
3. Select Connect to device in WPS
To set manually, select
●
4. Select and set WPS(Push button)
access
WPS(Push button):
Set the equipment to WPS (Push button) mode. For details, read the
manual of the equipment.
WPS(PIN):
Enter the PIN code of the equipment.
If the connection has failed, check the settings and positions of the
●
equipment. And then, follow the on-screen instructions.
■

Change settings

You can set up Network
Channel setting method
Follow the on-screen instructions and set manually.
Set Reset settings
●
= Note =
You cannot connect the internet service while the TV is set to
●
Access Point.
You can connect up to 7 devices. But the transfer rate will vary according
●
to communication environment or the numbers of connected equipment.
To confirm the current network settings
●
Home network
Ensure the equipment to connect supports WPS for this setup.
●
WPS: Wi-Fi Protected Setup™
●
MENU
Network Connection
and press OK to access
with
Change settings. (see below)
/ WPS(PIN)
name(SSID), Encryption
manually.
to reset the items of
Network settings
- 112 -
Custom Wireless Access Point
/ and press OK
with / and press
key, Wireless type
Change settings.
Network Status
to access
OK to
and
Wireless