Intelligent Auto Standby; Viera Link Control - Panasonic TX-L42FT60B User Manual

Intelligent Auto Standby

Set Intelligent Auto Standby
Settings
When the TV is on, non-used connected equipment goes into Standby mode
automatically to reduce the power consumption. For example, when the input
mode is switched from HDMI or when
(except for watching a disc).
This function may not work properly depending on the connected
●
equipment. In this case, set to Off.

VIERA Link Control

You can control some functions of the connected equipment with this TV's
remote control by pointing at the TV's signal receiver.
1. Display APPS List with
2. Select VIERA Link
3. Select VIERA Link Control
4. Select one of the following items with
Recorder / Player
Camera / Other
(The menu of the accessed equipment will be displayed. The input mode
will be changed automatically.)
The displayed item may vary depending on the connected equipment.
●
Home Cinema
●
theatre.
Other means Tuner set top box.
●
5. Follow the on-screen instructions to operate the menu of the equipment
Confirm the remote control code is "73".
●
Watching
To display the operation guide
●
OPTION
(If other manufacturers' product is accessed, Setup / Contents
Selection menu may be displayed.)
Available VIERA remote control buttons depend on the connected
●
equipment.
to On in the Setup Menu to use this function.
Setup VIERA Link Settings
Speaker Selection
APPS
with / / /
with /
/ Home Cinema / Video Camera
means Player theatre, Blu-ray Disc theatre or Recorder
External equipment
- 168 -
is changed to
and press OK to access
and press OK to access
/ and press OK
/ LUMIX
Operating with TV's remote control
TV
to access
/ Digital