Common Interface
Caution
Turn the TV off with Mains power On / Off switch whenever inserting or
●
removing the Common Interface (CI) Module.
If a view card and a card reader come as a set, first insert the card reader,
●
then insert the view card into the card reader.
Insert or remove the CI module completely in the correct direction as shown.
●
Remove the CI module from the TV when placing the TV facing upward.
●
This may cause damages to the CI module and CI slot.
Using Common Interface
The Common Interface Module menu provides access to software contained
in Common Interface (CI) Modules.
Video and audio signals may not be output depending on broadcasts or
●
services.
■
Insert the CI module (optional)
The features that appear on screen are dependent on the contents of the
●
selected CI module.
Follow the instructions that came with the viewing card to tune in the
●
encrypted channels. If encrypted channels do not appear, perform the
below to verify the card is recognised by the TV.
For more details, read the manual of the CI module, or check with the
●
broadcaster.
1. Display the
TV Selection
2. Select
DVB
with
3. Display the menu with
4. Select
Setup
System Menu
OK
to access
5. Select
Slot 1:
with
On-screen instructions may not correspond to the remote control buttons.
●
screen with
TV
/
and press
OK
to set
MENU
Common Interface
/
, press
OK
and follow the on-screen instructions
- 174 -
with
/
and press