Digital Tv - Panasonic TX-L42FT60B User Manual

Digital TV

Before requesting service or assistance, please follow these simple guides to
solve the problem.
If the problem still persists, please contact your local Panasonic dealer for
assistance.
Block noise, frozen or disappearing image occurs / Some channels cannot be
tuned
Check the position, direction and connection of the aerial or dish.
●
Check Signal Condition. If
●
signal is weak. Connecting the aerial to the TV directly may improve signal
quality than connecting the aerial through the equipment (set top box,
DVD, etc.).
Watching
Watching
Weather conditions will affect signal reception (heavy rain, snow, etc.),
●
in particular in poor reception areas. Even during good weather, the high
pressure can cause poor reception of some channels.
Due to the digital reception technologies involved, quality of the digital
●
signals may be relatively low in some cases, despite good reception of
analogue channels.
Turn the TV off with Mains power On / Off switch, and then on again.
●
If the problem persists, consult your local dealer or service provider for the
●
availability of services.
freesat Auto Setup cannot be done completely
Check connections and dish alignment. The dish needs to be pointing at
●
Astra2 at 28.2° East, and Eurobird1 at 28.5° East.
If the problem persists, consult your freesat registered retailer or call
●
Freesat (UK) Ltd on 08450 990 990 or visit www.freesat.co.uk
Signal Quality
Tuning and editing channels
Basic Basic connection
- 209 -
is displayed in red, the DVB
Signal Condition