Removing And Installing The Battery - Fujitsu Siemens Computers AMILO Li Series Easy Manual

Working with the notebook
To be able to make use of the optimal charging capacity of the batteries, the battery should be
completely discharged and then fully recharged.
If you do not use the batteries for long periods, remove them from the notebook. Never
i
store the batteries in the unit.

Removing and installing the battery

Only use batteries approved by Fujitsu Siemens Computers for your notebook.
!
Never use force when inserting or removing a battery.
Make sure that no foreign bodies get into the battery connections.
Removing the battery
► Switch the notebook off and pull the power plug out of the mains socket.
► Close the LCD screen so that it locks into place.
► Disconnect all cables connected to the notebook.
► Turn your notebook over and place it on a sturdy, flat surface.
1
Inserting a battery
26
3
2
1
► Push the battery lock in direction of the
arrow (1).
► Slide the battery release (2) in the direction
2
of the arrow and hold it in place.
► Remove the battery from the battery
compartment (3).
► Push the battery into the battery
compartment until it engages (1).
► Push the battery lock in direction of the
arrow (2).
10600718714, edition 1