Removing And Installing The Battery - Fujitsu Siemens Computers Amilo Si 2654 Operating Instructions Manual

Working with the notebook

Removing and installing the battery

Only use batteries approved by Fujitsu Siemens Computers for your notebook.
Never use force when inserting or removing a battery.
Make sure that no foreign bodies get into the battery connections.
Removing the battery
► Switch the notebook off and pull the power plug out of the mains socket.
Battery
► Close the LCD screen so that it locks into place.
► Disconnect all cables connected to the notebook.
► Turn your notebook over and place it on a stable, sturdy, flat surface. If necessary, lay an
anti-slip cloth on this surface to prevent the notebook from being scratched.
2
Inserting the battery
26
1
3
2
1
AMILO Notebook Si 2654 Operating instructions, edition 1
► Push the battery lock in direction
of the arrow (1).
► Slide the battery release (2) in the direction
of the arrow and hold it in place.
► Remove the battery from the battery
compartment (3).
► Push the battery into the battery
compartment until it engages (1).
Battery
► Push the battery lock in direction
of the arrow (2).