Table of Contents
Advertisement
FINISHING FIREPLACE FOR
INSTALLATION
(V)LVFO43 series fireplace come with the rear
panel semi-installed. If you will be using the
fireplace for a one sided regular application,
you will need to finish the installation of the
rear panel. If you will be upgrading the fire-
place to a see-thru, the rear panel will need
to be removed (See Upgrading (V)LVFO43
Series to See-Thru Application).
1. Using self-tapping screws provided and
holes on rear panel as a guide, screw
the rear panel to the fireplace as shown
in Figure 14.
INSTALLING HOOD
1. Loosen screws at top of face opening and
slide hood through screws as shown in
Figure 15.
2. Tighten screws securing hood to fireplace.
Figure 14 - Installing Rear Panel for
Regular Applications
Figure 15 - Installing Hood
127035-01A
INSTALLATION
Continued
www.SuperiorFireplaces.US.com
UPGRADING (V)LVFO43 TO SEE-
THRU APPLICATION
Removing Rear Panel
1. In the rear of the fireplace, locate screws
at top of rear panel and remove as shown
in Figure 16. Discard screws and rear
panel.
2. Unscrew mount bracket from top face as
shown in Figure 17. Discard mounting
bracket and replace screws.
Figure 16 - Removing Rear Panel for
See-Thru Applications
Figure 17 - Removing for See-Thru
Applications
13
Hide quick links:
Advertisement
Table of Contents
