Programming Overview; Using Control Center Software - Real Care Baby II-plus Operating Handbook

Programming Overview

You may use Control Center software or the handheld control unit to
set up and program Baby. These are the basic steps to follow before a
simulation can begin.
Setup
• Charge Baby
• Install software or set clock on the handheld control unit
Program
• Add Baby to software database (Control Center only)
• Confi gure Baby and wireless IDs
• Set times/dates and diffi culty level (infant schedules)
• Select optional data
• Transfer selections to Baby
• Attach IDs to tamperproof wristbands (keep confi gured IDs with
corresponding Babies)

Using Control Center Software

Control Center automatically selects its screen display language based on your
computer's regional settings (English or Spanish).
A complete Help Guide for using the software can be found on
the CD (refer to the "Help" menu after the software is installed).
Adding Baby to the Software
Upon fi rst use you must help the software recognize your Babies.
Babies must be charged, Control Center must be installed and
running, and the Communication
Pod must be connected to your
computer's USB port.
1. Select [Add].
2. The Add Baby screen appears
with complete instructions for
adding each Baby.
8