Using The Control Unit - Real Care Baby II-plus Operating Handbook

Using the Control Unit

RealCare Baby II-plus is wireless. Point control unit toward one of the
®
communication areas (see page 6) to transmit data. The control unit has easy-to-
use screens. Simply scroll using the arrow buttons to make your selections.
Important Reminders:
• Set the clock in the control unit the fi rst time you use it.
• To communicate with Baby, position the control unit within two inches of one
of the areas illustrated on page 6 and HOLD IT there for at least 4-5 seconds.
Baby should chime to confi rm that it is receiving information from the control
unit. If there is no chime, re-position the control unit and HOLD IT again for 4-5
seconds. Do not wave the control unit around Baby.
• Keep Babies at least six inches apart while programming.
• Removing the batteries from the control unit does NOT erase the data. The
control unit stores data for 30 simulations. Data is listed from the oldest
(bottom of list) to the newest (top of list). The oldest data is overwritten after
more than 30 simulations have been downloaded.
Contact (for use with older model Babies)
To use with Original RealCare
control unit contact to the contact point on Baby's back. This
contact is not needed for RealCare
RealCare Baby II models.
®
USB connection
Connect the control unit to a personal computer to download
data.
LCD screen
Displays all options. Screens stay as you leave them.
Power button
Turns the control unit on and off.
Left arrow
• Returns you to the previous screen or Main Menu
• Accepts any changes made
• Scrolls left through data selections
Up arrow
Scrolls up through menu and data selections.
Down arrow
Scrolls down through menu and data selections.
Right arrow
• Accepts any changes made
• Advances to next screen if further options exist
• Scrolls right through data selections
Note: push and hold buttons to auto scroll through data
selections.
Baby, you must touch the
®
Baby II-plus or
®
10
Help button displays
a help screen about the
option you are using.