Panasonic KX-TDA0141 Quick Installation Manual page 19

KX-TDA0141/KX-TDA0142
Channel 0 Channel 1 Channel 2 Channel 3 Channel 4 Channel 5 Channel 6 Channel 7 Channel 8 Channel 9
1 1
2 2
3 3
4 4
Note
If more than 1 CS is in Radio Signal Test mode, each CS must have a unique channel number.
4.
After setting the DIP switches, connect the CS to an AC adaptor/battery box using a power supply adaptor,
or connect it to the PBX.
WARNING
When installing or testing a product with an external AC adaptor, the AC adaptor should be
plugged into a wall outlet or floor-mounted AC outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.
Notice
•
For users in the United Kingdom:
240 V AC must not be used on a building site. Instead of an AC adaptor, connect a battery box to
the CS.
•
When using the KX-TDA0158, it is NOT recommended to conduct the site survey using the battery
box.
•
If the Power Supply Select switch is set to ON in step 3, connect the CS to an AC adaptor/battery
box. If it is set to OFF, connect the CS to the PBX (KX-TDA0158 only).
1 1 1
2 2 2
3 3 3
4 4 4
DIP Switch
OFF ON
1
2
3
4
5
6
1 1 1
2 2 2
3 3 3
4 4 4
4 Before Site Survey
Channel Number Switch
Keep this switch at the default
"OFF" position. Otherwise,
the CS will not function.
Radio Signal
Test Switch
1 1
2 2
3 3
4 4
Quick Installation Guide 19