Restoring Factory Default Settings - ActionTec T1200H User Manual

Restoring Factory Default Settings

If the Gateway's factory default settings need to be restored (to build a new net-
work from the beginning, for example), use the following procedure:
1. Click Restore Defaults in any Advanced Setup screen. The Restore Defaults
screen appears.
2. If you want to restore only the Gateway's default WAN port settings, click
Restore across from Restore WAN port Settings. The Gateway's current
WAN port settings will be deleted, and the factory default WAN port settings
restored.
3. If you want to restore only the Gateway's default wireless settings, click Restore
across from Restore Default Wireless Settings. The Gateway's current wireless
settings will be deleted, and the factory default wireless settings restored.
4. If you want to restore only the Gateway's default firewall settings, click Restore
across from Restore Default Firewall Settings. The Gateway's current firewall
settings will be deleted, and the factory default firewall settings restored.
5. If you want to restore all the Gateway's default settings, click Restore across
from Restore Modem to Factory Default Settings. All of the Gateway's current
settings (including wireless and firwall settings) will be deleted, and the factory
default settings restored.
Note: All of the Gateway's settings and parameters will be
restored to their default values after performing the Restore
Factory Default procedure.
VDSL2/GigE Wireless 11n Gateway
52