Getting To Know The Gateway - ActionTec T1200H User Manual

• WPS support
• Advanced firewall
• ALG

Getting to Know the Gateway

This section contains a quick description of the Gateway's lights, ports, etc.
The Gateway has several indicator lights (
and a series of ports and switches on its rear panel.
Front Panel
The front panel of the Gateway features 11 LEDs: Power, DSL, Internet, WAN
Ethernet, Internet, Ethernet (4), Wireless, USB, and WPS Push Button.
Power
The Power LED displays the Gateway's current status. If the Power LED glows
steadily green, the Gateway is receiving power and fully operational. When the
Power LED is rapidly flashing, the Gateway is initializing. If the Power LED is
glows red when the Power cord is plugged in, the Gateway has suffered a critical
error and technical support should be contacted. If the Power LED is flashing
red, the Gateway is performing a firmware update.
DSL
The DSL LED illuminates when the Gateway is connected to an ADSL line. If
the DSL LED is flashing, the Gateway is in training for DSL service.
Internet
When the Internet LED glows steadily, the Gateway is connected to the DSL
provider. When it flashes, data traffic is passing across the Gateway.
Chapter 1 Introduction
s) and a button on its front panel,
LED
3