Step 7 - Shock Removal; Step 8 - Caster Removal - Sunrise Medical Rhapsody Service Manual

Step 7 - Shock removal

Disassembly
1. Using a 13mm wrench, remove top shock bolt (A)
2. Mark the position of the suspension shock mount.
3. Use a 5mm hex key to remove the two socket head
cap screws (B) holding the suspension shock mount
(C).
4. Use two 19mm wrenches to remove the lower shock
bolt (E) and nut(D).
Reassembly:
1. Insert the M12x1.75x100 hex bolt (D) through the front
suspension arm (F) and the lower hole in the shock.
2. insert the suspensiopn shock mount shaft into the top
hole in the shock.
3. replace the two M6x17 socket head cap screws(B) and
hand tighten
4. Slide the suspension shock mount (C) back to its
original position and tighten the M6x17socket head
cap screws (B)
5. Replace and tighten the top shock bolt (A)

Step 8 - Caster removal

1. Remove caster cap (fig s8.1)
2. Use a 19mm socket wrench to remove the caster nut
(fig s8.2)
SUNRISE MEDICAL
Section 4
E
F
RHAPSODY SERVICE MANUAL
B
B
D
2006
C
A
s7.2
s81
s8.2
PAGE 15