Charging The Battery - Canon EOS REBEL T3 Basic Instruction Manual

Charging the Battery

LC-E10
LC-E10E
It takes approx. 2 hours to fully recharge a completely exhausted
battery at 23°C / 73°F. The time required to recharge the battery
depends on the ambient temperature and the battery's charge
level.
For safety reasons, recharging in low temperatures (6°C - 10°C /
43°F - 50°F) will take a longer time (up to 4 hours).
20
1
Remove the protective cover.
Detach the protective cover provided
with the battery.
2
Attach the battery.
As shown in the illustration, attach the
battery securely to the charger.
To detach the battery, follow the
above procedure in reverse.
3
Recharge the battery.
For LC-E10
As shown by the arrow, flip out the
battery charger's prongs and insert
the prongs into a power outlet.
For LC-E10E
Connect the power cord to the
charger and insert the plug into the
power outlet.
X
Recharging starts automatically and
the charge lamp turns orange.
X
When the battery is fully recharged,
the full-charge lamp will turn green.