Shoot By Lighting Or Scene Type - Canon EOS REBEL T3 Basic Instruction Manual

Shoot by Lighting or Scene Type

In the <2> (Portrait), <3> (Landscape), <4> (Close-up), and <5>
(Sports) Basic Zone modes, you can shoot while the settings match the
lighting or scene type. Normally, [Default setting] is adequate, but if the
settings match the lighting condition or scene, the picture will look more
accurate to your eye.
For Live View shooting, if you set both [Shoot by lighting or scene
type] and [Shoot by ambience selection] (p.64), you should first set
[Shoot by lighting or scene type]. This will make it easier to see the
resulting effect on the LCD monitor.
Lighting or Scene
(1) Default setting
(2) Daylight
(3) Shade
(4) Cloudy
(5) Tungsten light
(6) Fluorescent light
(7) Sunset
1 7 C 2 3 4 5 6
k
k
k
k
k
k
k
1
Set the Mode Dial to any of the
following modes: <2> <3>
<4> <5>
2
Display the Live View image.
With the Live View image displayed,
you can see the resulting effect.
Press the <A> button to switch to
Live View shooting.
k k k
k k k
k k k
k k k
k k
k k
k k k
67