D Using The Built-In Flash; Effective Flash Range - Canon EOS REBEL T3 Basic Instruction Manual

D Using the Built-in Flash

In indoors, low light, or backlit conditions in daylight, just raise the built-
in flash and press the shutter button to take flash pictures. In the <d>
mode, the shutter speed (1/60 sec. - 1/200 sec.) will be set
automatically to prevent camera shake.

Effective Flash Range

ISO Speed
(p.77)
100
200 1 - 3.7 / 3 3 - 12.1
400 1 - 5.3 / 3 3 - 17.4
800/AUTO* 1 - 7.4 / 3 3 - 24.3
1600 1 - 10.5 / 3.3 - 34.4
3200 1 - 14.9 / 3.3 - 48.9
6400 1 - 21.0 / 3.3 - 68.9
* For fill flash, the ISO speed might be set lower han ISO 800.
88
1
Press the <D> button.
2
Press the shutter button halfway.
3
Take the picture.
[Approx. in meters/feet]
EF-S18-55mm f/3.5-5.6 IS II
EF-S18-55mm f/3.5-5.6 III
Wide Angle
1 - 2.6 / 3.3 - 8.5
In Creative Zone modes, you can
press the <D> button anytime to take
flash pictures.
While the flash is recycling, "DbuSY"
is displayed in the viewfinder, and
[BUSYD] is displayed on the LCD
monitor.
In the bottom left of the viewfinder,
check that the <D> icon is lit.
When focus is achieved and you
press the shutter button completely,
the flash will fire for the picture.
Telephoto
1 - 1.6 / 3.3 - 5.2
1 - 2.3 / 3.3 - 7.5
1 - 3.3 / 3.3 - 10.8
1 - 4.6 / 3.3 - 15.1
1 - 6.6 / 3.3 - 21.7
1 - 9.3 / 3.3 - 30.5
1 - 13.1 / 3.3 - 43.0