Enabling/Disabling Privacy Guard; Managing The Access Code; Changing The Access Code - Cisco 7960 User Manual

If you enter anything other than the available menu options, you will be prompted
two more times to enter a valid menu option. If you do not select a valid option in
the allowed time or if you hang up without making a choice, the system plays the
announcement that you are unavailable and disconnects the call.

Enabling/Disabling Privacy Guard

The T6000 system allows you to turn the Privacy Guard feature on and off (i.e.,
decide when calls without Caller ID information will be screened). Disabling
(turning off) the feature does not delete any access codes already entered for the
feature.
1. Press *88 on the telephone keypad.
NOTE: On the 7960 MGCP phone, you may skip the next step.
2. Press the Dial soft key, or line or SPEAKER button, or pickup the handset.
3. A voice prompt tells you whether Privacy Guard is enabled or disabled and
then gives the menu choices.
4. Press 1 to enable Privacy Guard if it is disabled or to disable the feature if it is
enabled.
5. Choose another option or hang up.

Managing the Access Code

Your 3-digit Access Code is managed using the keypad on your telephone. You can
change the code at any time and can listen to your chosen number if you forget
what you set.

Changing the Access Code

1. Press *88 on the telephone keypad.
NOTE: On the 7960 MGCP phone, you may skip the next step.
2. Press the Dial soft key, or line or SPEAKER button, or pickup the handset.
A voice prompt tells you whether Privacy Guard is enabled or disabled and
then gives the menu choices.
3. Press 2 to set or change the 3-digit Access Code.
4. Enter the Access Code by pressing the desired digit keys on the telephone
keypad.
5. Press # to save the entry or * to exit without saving.
6. Select a menu item or hang up.
46 System Telephone Features Cisco 7960/7940 Telephone User Guide
620-05600230