Honda TRX680FA Service Manual page 187

COOLING SYSTEM
REMOVAL
Remove the following:
- mud guard lid (page 3-7)
- right front mud guard (page 3-8)
- right inner fender (page 3-9)
Drain the coolant from the system (page 7-7).
Disconnect the water hoses and bypass hose from
the water pump.
Remove the following:
- drain hose
- three cover bolts and sealing washer
- drain hose guide
- two mounting bolts
- pump cover
- O-ring
- water pump body
- O-ring
MECHANICAL SEAL REPLACEMENT
Loosen the impeller by turning it counterclockwise
while holding the pump shaft slot.
Remove the following:
- impeller assembly
- washer
- pump shaft
- thrust washer
BOLTS/SEALING WASHERS
GUIDE
DRAIN HOSI
IMPELLER
WASHER
WASHER
SHAFT
Remove the mechanical seal using the special tools.
TOOLS:
Remover head, 15 mm
Bearing remover shaft
Bearing remover, 15 mm
Remover weight
07936-KC10200
07936-KC10100 or
07936-KC10500
07741-0010201 or
07936-371020A or
07936-3710200
(U.S.A. only)
MECHANICAL SEAL
BEARING REMOVER
7-14