Setting The Deep Stops; Setting The Air Time - Suunto D9tx User Manual

Wristop dive computer
Hide thumbs Also See for Suunto D9tx:
Table of Contents

Advertisement

You can set the dive profile sample rate in free dive to 1, 2, or 5 seconds. The sample
rate for gauge, mixed and air dives is to 10, 20, 30, or 60 seconds. The factory default
setting is 20 seconds.

5.8.10. Setting the deep stops

In the AIR mode in the Deep Stops setting mode, the Deep stops can be set "ON" or
"OFF" depending on whether the Deep stops are used or not. In the MIXED mode the
Deep stops are always set ON.

5.8.11. Setting the air time

In the Air Time setting mode, the remaining air time display can be set "ON" or "OFF"
depending on whether estimated remaining air time display is used or not. Air Time
can only be displayed when the wireless tank pressure transmitter is in use.
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
63

Advertisement

Table of Contents
loading

This manual is also suitable for:

D9tx

Table of Contents