Table of Contents
Advertisement
Page III
depth/time profile of the dive
•
•
water temperature
tank pressure (if enabled)
•
NOTE
NOTE
NOTE
7.6.2. Dive history
The dive history is a summary of all the dives recorded by the dive computer.
The following information will be shown on the display:
106
Memory capacity depends on the selected sample rate. With
factory default setting (20 s) and without transmitter data the
capacity is approximately 140 hours. With transmitter data
the capacity is minimum 35 hours. In Dive Free mode the
maximum memory capacity is 35 hours. After that, when new
dives are added, the oldest dives are deleted. The contents
of the memory will remain when the battery is changed
(providing that the battery has been replaced according to the
instructions).
Several repetitive dives are considered to belong to the same
repetitive dive series if the no-fly time has not ended. See
Section 7.2. Dive numbering for further information.
Depending on the sampling rate, the maximum depth reading
may differ from the maximum depth reading of the Dive History
up to 0.3 m/1 ft.
Advertisement
Table of Contents
