5.8.8. Setting the Deep Stops
If set to ON, iterative Deep Stops will be prompted. The length of the individual Deep
Stops can be set to 1 or 2 minutes.
5.8.9. Setting the RGBM values
For certain divers and diving conditions, it may be desirable to set the attenuated
RGBM mode. The selection is displayed during the DIVE mode startup. The options
are full RGBM effects (100%), and attenuated RGBM (50%).
5.9. Activation and pre-checks
This section describes how to activate the DIVE mode and explains the pre-checks
that it is highly recommended you perform before you get into the water.
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
39