Setting The Sample Rate; Setting The Deep Stops - Suunto D6i User Manual

ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.

5.8.9. Setting the sample rate

The Sample Rate setting controls how often the depth, tank pressure (if enabled), and
water temperature is stored in the memory.
The factory default setting is 20 seconds.
You can set the dive profile sample rate in free dive to 1, 2, or 5 seconds. The sample
rate for nitrox and air dives is 10, 20, 30, and 60 seconds.
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.

5.8.10. Setting the deep stops

In the AIR mode in the Deep Stops setting mode, the Deep stops can be set "ON" or
"OFF" depending on whether the Deep stops are used or not.
58