3
Digital Video/Audio Menu
SDI Field
AES Field
AC-3 Compression Menu
Audio 1 and Audio 2 Field
34
The Digital Video/Audio Menu configures the digital video/audio rear-panel
connections (either enabled or disabled). Press the buttons until the Digital
Video/Audio menu appears (shown below).
The SDI field enables or disables the Serial Digital Interface (digital video output)
from the one SDI connector on the rear of the DSR-4550. Press the buttons to
enable or disable SDI and press the ENTER button to confirm the selection.
The AES field enables or disables the digital audio output (per a standard from the
Audio Engineering Society) for the two Digital Audio connectors on the rear of the
DSR-4550. Press the buttons to enable or disable AES and press the ENTER
button to confirm the selection.
The AC-3 Compression Menu displays the current AC-3 compression selections
(either internal or external) for audio 1 and audio 2 channels. Press the
buttons until the AC-3 Compression menu appears (shown below).
AC-3 COMPRESSION
E
The Audio 1 or 2 fields sets the AC-3 decoding mode for both audio channels. If set
to Internal, the IRD decodes the AC-3 audio data. If set to External, the IRD does
not process the audio internally and it indicates there is external audio decoding
equipment associated with both audio channels.
Press the buttons to set the AC-3 decoding on Audio 1or Audio 2 and use the
4 buttons to move from field to field within this menu.
Default: Enabled
Default: Enabled
Audio 1
Internal
Default: Internal
Audio 2
Internal