Servicing Fixtures And Tools; Preparation For Servicing - Memorex MVDT2402 Service Manual

(For 2 heads model)
VHS Alignment Tape
3
JG001
(VN S-LI6 )
2
3
JG001A (VN S-CO1 )
2
3
JG001Q (VN S-LI6 H)
2
3
JG001T
(VN S-X6 )
2
JG153 X Value Adjustment
Screwdriver
JG185 Tentelometer
Ref. No. Part No.
JG001 APJG001000
JG001A APJG001A00
JG001Q APJG001Q00
JG001T APJG001T00
APJG001B00
JG001B
JG001I APJG001I00
JG001P APJG001P00
JG001S APJG001S00
JG002B APJG002B00
JG002E APJG002E00
JG002F APJG002F00
JG005 APJG005000
JG153 APJG153000
JG022 APJG022000
JG024A APJG024A00
JG100A APJG100A00
JG185 APJG185000
NOTE: The both pressing of set key and remote control key will not be possible if clock has been set. To reset clock,
either unplug AC cord and allow at least 5 seconds before Power On.
1. Set the VOLUME to minimum.
2. Press both VOL. DOWN button on the set and the FF button on the set for more than 2 seconds.
(The BOT, EOT, and the Reel Sensor do not work and the VCR deck can be operated without a cassette tape.)
3. In case of using a cassette tape, press the STOP/EJECT button to insert or eject a cassette tape.
Turn on the power and re-check the cable before checking the trouble points.

SERVICING FIXTURES AND TOOLS

(For 4 heads model)
VHS Alignment Tape
JG001B
(VN S-LI6
1
JG001I (VN S-CO1
1
JG001P (VN S-LI6
1
3
JG001S
(VN S-X6
1
JG022 Master Plane
Parts Name
VHS Alignment Tape
VHS Alignment Tape
VHS Alignment Tape
VHS Alignment Tape
VHS Alignment Tape
VHS Alignment Tape
VHS Alignment Tape
VHS Alignment Tape
Adapter
Dial Torque Gauge (10~90gf•cm)
Dial Torque Gauge (60~600gf•cm)
Post Adjustment Screwdriver
X Value Adjustment Screwdriver
Master Plane
Reel Disk Height Adjustment Jig
Torque Tape (VHT-063)
Tentelometer

PREPARATION FOR SERVICING

JG002B Adapter
JG002E Dial Torque Gauge
3
)
(10~90gf•cm)
3
)
JG002F (60~600gf•cm)
3
H)
)
JG024A Reel Disk Height
Adjustment Jig
Monoscope, 6KHz (For 2 heads model)
Color Bar, 1KHz (For 2 heads model)
Hi-Fi Audio (For 2 heads model)
X Value Adjustment (For 2 heads model)
Monoscope, 6KHz (For 4 heads model)
Color Bar, 1KHz (For 4 heads model)
Hi-Fi Audio (For 4 heads model)
X Value Adjustment (For 4 heads model)
VSR Torque, Brake Torque (S Reel/T Reel Ass'y)
Brake Torque (T Reel Ass'y)
VSR Torque, Brake Torque (S Reel)
Guide Roller Adjustment
X Value Adjustment
Reel Disk Height Adjustment
Reel Disk Height Adjustment
Playback Torque, Back Tension Torque During Playback
Confirmation of Tape Tension on Playback
D1-1
JG005 Post Adjustment
Screwdriver
Part No. SV-TG0-030-000
(small)
JG100A Torque Tape
(VHT-063)
Remarks