When installing:
Ensure that the hard disk drive or solid-state drive is firmly attached.
1060 Wireless-LAN card
For access, remove this FRU:
•
"1010 External battery pack" on page 59
•
"1020 Base cover assembly" on page 59
Removal steps of the wireless-LAN card
1
In step
, disconnect the connectors by using the removal tool for the antenna RF connector or pick off the
connectors in the direction as shown by using your fingers.
Step
Screw (quantity)
2
M2 × 2.7 mm, flat-head, nylon-coated (1)
When installing:
Plug the gray cable into the main connector and the black cable into the auxiliary connector on the card.
1
1
Color
Black
3
1
.
Chapter 9
Removing or replacing a FRU
Torque
0.181 Nm
(1.85 kgf-cm)
65