E15 Gen 3
When installing:
Ensure that the connector is attached firmly and cables are routed properly.
1060 Wireless LAN card
For access, remove this FRU:
• "1010 Base cover assembly" on page 64
Removal steps of the wireless LAN card
Step
Screw (quantity)
3
M2 × L2.8 mm, flat-head, nylon-coated (1)
When installing:
Plug the gray cable into the connector labeled MAIN on the card; and plug the black cable into the connector
labeled AUX on the card.
Color
Torque
Silver
0.181 Nm
(1.85 kgf-cm)
.
Chapter 8
Removing or replacing a FRU
71