When installing:
Ensure that the internal battery pack is attached firmly.
1040 Memory module
For access, remove this FRU:
•
"1010 External battery pack" on page 59
•
"1020 Base cover assembly" on page 59
Removal steps of the memory module
When installing:
Insert the notched end of the memory module into the memory slot at an angle of about 20 degrees. Press
the memory module in firmly, and pivot it downward until it snaps into place. Ensure that the memory module
is firmly seated in the slot and does not move easily.
1050 Hard disk drive or solid-state drive and drive cable
For access, remove this FRU:
•
"1010 External battery pack" on page 59
•
"1020 Base cover assembly" on page 59
62
Hardware Maintenance Manual
1
1