1070 Wireless-WAN card or M.2 solid-state drive
For access, remove this FRU:
•
"1010 External battery pack" on page 59
•
"1020 Base cover assembly" on page 59
Removal steps of the wireless-WAN card
Step
Screw (quantity)
1
M2 × 2.7 mm, flat-head, nylon-coated (1)
Cable routing:
If you are servicing a WAN-ready model, do not remove the connector cap from the wireless-WAN cable.
Route and secure the cables as shown in the following illustration.
66
Hardware Maintenance Manual
1
1
1
3
1
Torque
Color
Black
0.181 Nm
(1.85 kgf-cm)