Lowrance HDS-5 Operation Manual page 19

Pages
Allows you to Add/Remove sources and adjust Bezel, Caption
covered previously in the section.
the Edit Overlay menu and press ENTER.
Caption
Invert Text Changes appearance of data overlay text
Add Source
Displays the same type of data from different sources on
the same analog gauge.
If, for example, you have multiple engines, you could
select port engine RPM as your data type and then display
starboard engine RPM using the Add source command.
Both data sources could be displayed simultaneously on
an analog gauge with two needles; one dedicated to each
source.
To use Add Source:
1.
Select Add Source from the Edit Overlay menu
and press ENTER. The Add source menu will
appear.
2.
Highlight a category a press
subcategories will appear.
3.
Select the desired subcategory and press
ENTER.
To remove add source data:
1. Highlight
ENTER. A list of sources will appear.
2.
Remove source
ENTER. A list of
16
on
Add Source menu
Analog gauge
showing RPM from
two engines.
ENTER.