Settings
Route
Allows you to select a route to be used
during a simulation.
To select a route:
1.
Select
Route from the Advanced menu and press ENTER. A Route List
will appear.
2.
Use the keypad to select the desired route and press
Set Start Position
Sets the starting point of a GPS Simulation to the cursor position.
To set start position:
1.
Highlight the
press ENTER.
2.
Select the
3.
Highlight
Restore Defaults
Switches Advanced simulator options back to defaults settings. To restore defaults,
select Restore Defaults from the Advanced menu and press ENTER.
Set Start Position
Set button and press ENTER.
OK and press ENTER.
112
ENTER.