Lowrance HDS-5 Operation Manual page 16

Edit Mode
When a gauge is added to the display it will be shown in edit mode. Analog and
bar gauges are shaded in blue when they are in Edit Mode. Digital Gauges will be
shown with a blue border.
Analog gauge in edit
mode
Move or Placing a Gauge
The Move gauge command allows you to move data overlay to any position on the
screen. When you use the Place gauge command, the gauge will be locked in its
current position.
To move or place a gauge:
1. Press the
2.
location on the screen.
3. Press ENTER to place the gauge.
Select Data
Used to select data that will be shown on the data overlay display. When selecting
from the a data subcategory.
ENTER key when the gauge is in Edit
Digital gauge in edit mode
13
Pages