Selecting Preset Sound Modes; Storing Your Own Sound Adjustments - JVC KS-F383R Instructions Manual

Selecting preset sound modes

You can select a preset sound adjustment
suitable to the music genre.
Select the sound mode you want.
SCM Each time you press the button,
the sound mode changes as
follows:
SCM OFF
Indication For:
SCM OFF (Flat sound)
BEAT Rock or disco
music
SOFT Quiet
background
music
POP Light music
Notes:
• You can adjust each sound mode to your preference,
and store it in memory.
If you want to adjust and store your original sound
mode, see "Storing your own sound adjustments"
that follows.
• To adjust the bass and treble reinforcement levels or
to turn on/off the loudness function, see page 19.
20
(BEAT)
(SOFT) (POP)
Preset values
BAS TRE
00 00
+02 00
+01 –03
+04 +01
Storing your own sound
adjustments
You can adjust the sound modes (BEAT, SOFT,
POP) to your preference and store your own
adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Call up the sound mode you want to
adjust.
SCM
LOUD
2
Make adjustments.
OFF
• For details, see "Adjusting the sound" on
ON
page 19.
3
OFF
Repeat step 2 to adjust the other
items.
4
OFF
Press and hold SCM until the sound
mode you have selected in step 1
flashes on the display.
SCM
5
Repeat the same procedure to store
other sound modes.
To reset each sound mode to the factory
settings, repeat the same procedure and
reassign the preset values listed in the table on
the left column.
• See the left column for details.
Your adjustment made for the
selected sound mode is stored in
memory.