Table of Contents
Advertisement
BASIC OPERATIONS
1
Turning on the power
1
Turn on the power.
/I/ATT
Note on One-Touch Operation:
• When you select a source in step 2 below, the power
automatically comes on. You do not have to press this
button to turn on the power.
• If the cassette is already in the cassette compartment,
tape play starts automatically. However, it is not
recommended to leave the cassette in the compartment
when turning off the power or ignition key. It may
damage the tape head and the cassette.
2
Select the source.
F M
A M
E X
To operate the tuner (FM or AM),
see pages 5 – 8.
To operate the tape,
see page 9.
EX (extra) button: To use this button, you
need to preset your favorite station in
advance. For details, see pages 7 – 8.
4
3
3
Adjust the volume.
Volume level appears.
4
Adjust the sound as you want.
(See pages 10 – 11.)
To drop the volume in a moment
Press
briefly while listening to any source.
"ATT" starts flashing on the display, and the volume
level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
To turn off the power
Press and hold
Note:
When you use this unit for the first time, set the built-in
clock correctly, see page 12.
2
To increase the volume.
To decrease the volume.
for more than 1 second.
Advertisement
Table of Contents
