Page 1
CASSETTE RECEIVER KS-F110 RECEPTOR-REPRODUCTOR DE CASSETTE KS-F110 RADIOCASSETTE KS-F110 DETACHABLE CONTROL PANEL SOUND PROG LOUD DISP SCAN For installation and connections, refer to the separate manual. Para la instalación y las conexiones, refiérase al manual separado. Pour l’installation et les raccordements, se référer au manuel séparé.
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS BASIC OPERATIONS ............ 3 RADIO OPERATIONS ........... 4 Listening to the radio ..............4 Storing stations in memory ............
ATT briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a moment. To resume the previous volume level, press the button briefly again. To turn off the power Press ATT for more than 1 second. EN02-03.KS-F110[J]/f 98.11.18, 11:01 AM...
Now you can manually change the frequency while “M” is flashing. 3 Press repeatedly until the frequency you want is reached. • If you hold down the button, the frequency keeps changing until you release the button. EN04-08.KS-F110[J]/f 99.7.8, 8:39 AM...
• A previously preset station is erased when a new station is stored in the same preset number. • Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again. EN04-08.KS-F110[J]/f 99.7.8, 8:39 AM...
• A previously preset station is erased when a new station is stored. • Preset station is erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the station again. EN04-08.KS-F110[J]/f 99.7.8, 8:39 AM...
The unit automatically turns on (if it has been off). Your favorite station is tuned in — except when the tape is playing. • If you press the button again, the last received station will be tuned in. EN04-08.KS-F110[J]/f 99.7.8, 8:39 AM...
To reset to the factory setting, follow the above step 1 and 2, then press – in step 3 (“AREA US” appears on the display.) AREA EU: Select this when used in an area other than North and South America. AREA US: Select this when used in North or South America. EN04-08.KS-F110[J]/f 99.7.8, 8:39 AM...
• You can also eject the cassette with the unit turnd off. To fast-wind a tape Press either ¡ or 1. The tape will be wound in the direction of the arrows (¡ or 1). To restart playback, press ¡ or 1 lightly. EN09.KS-F110[J]/f 98.11.18, 11:07 AM...
• To adjust only the bass and treble reinforcement levels to your preference, see “Adjusting the sound” on page 11. • When one of the sound modes is selected, it is shown on the display as follows: LOUD SOFT BEAT For example, when “POP” is selected. EN10-12.KS-F110[J]/f 98.11.18, 11:08 AM...
* If you are using a two-speaker system, set the fader level to “00” (center). Adjust the level. Note: Normally the + and – buttons work as the volume control buttons. So you do not have to select “VOL” to adjust the volume level. EN10-12.KS-F110[J]/f 98.11.18, 11:09 AM...
Your setting is stored in memory. Repeat the same procedure to store other settings. To reset to the factory settings Repeat the same procedure and reassign the preset values listed in the table on page 10. EN10-12.KS-F110[J]/f 98.11.18, 11:09 AM...
To check the current clock time (changing the display mode) Press DISP repeatedly. Each time you press the button, the display mode changes as follows. During tuner operation: During tape operation: Clock Frequency Play mode Clock EN13-14.KS-F110[J]/f 98.11.18, 11:13 AM...
If you frequently detach the control panel, the connectors will deteriorate. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. Connectors EN13-14.KS-F110[J]/f 98.11.18, 11:13 AM...
• Do not play the tapes with peeling labels; otherwise, they can damage the unit. • Tighten tapes to remove slack since loose tape may become entangled with the mechanism. • Do not leave a cassette in the cassette compartment after use, as the tape may become slack. EN15-17.KS-F110[J]/f 98.11.18, 11:15 AM...
The built-in microcomputer While holding SEL, press all. may function incorrectly due to ATT for more than 2 seconds noise, etc. to reset the unit. (The clock setting and preset stations stored in memory are erased.) EN15-17.KS-F110[J]/f 98.11.18, 11:15 AM...