Using Threading Mode - Brother RH-9820 Instruction Manual

5-7. Using threading mode

This is used to thread the upper thread. (Refer to "4-2. Threading the upper thread" for details on using the threader.)
When the sewing machine switches to threading mode, the needle bar ( feed) turns 180 degrees, and then the energization of the X, Y and
feed motors is stopped. This allows the needle bar and feed base to move freely, in order to make threading of the upper thread easier.
In addition, threading mode is safe because the sewing machine will not operate when the start switch is pressed (or the treadle is
depressed).
1
Press the THREAD key during the standby condition in automatic mode, test mode or manual mode.
0428B
2
Thread the thread.
3
Once the upper thread has been threaded, press the RESET key.
0429B
5. USING THE SEWING MACHINE (OPERATION PANEL: BASIC OPERATION)
The tension discs will open.
The buzzer will sound, and then the needle bar ( feed) (1) will turn 180 degrees.
After this, energization of the X, Y and feed motors will be stopped.
After 3 minutes have passed, the tension discs will close.
After the home positions are detected, the needle bar and feed base will return to
the material setting position.
The tension discs will close.
RH-9820
0319B 0529B
50