Water Circuit Filling; Grinding Adjustment - Saeco AMBRA SUP 015VR Operating And Maintenance Manual

After fixing the plate the cover must be placed on the water
and bean hoppers before using the machine (Fig. 11).
Secure the cover by turning the key in the lock (Fig. 12).

Water circuit filling

When the vending machine is turned on for the first time, the
boiler is automatically filled.
This message will appear on the display:
Place a cup or a suitable container under the hot water spout.
Turn on the vending machine and wait for the procedure to
end.
Fig. 11
Fig. 12
"SELF-DIAGNOSIS"
"BOILER FILLING"
Important
Prime the circuit before starting the machine for the first time,
following a long period of inactivity, if the water tank has
been fully emptied or if the pump has malfunctioned.

Grinding adjustment

If the coffee is brewed too fast, as in the case of a too coarse
grinding, or if it drips out, in the case of a too fine grinding,
the grinding of the coffee grinder must be adjusted. Its
recommended initial position is point 5 on the ring nut.
If grinding is too coarse and the coffee is dispensed too
rapidly, adjust the grinder to a finer setting (e.g., from 5 to
3). If the coffee drops out, select a coarser setting (e.g.,
from 5 to 7) (Fig. 13) (Fig. 14).
Fig. 13
English
25