Specification - Charnwood W616 Operating Instructions Manual

7. Do not cut material that is badly warped or which has screws or nails in it
8. Be extra vigilant when cutting stock which has loose knots in it as these may
fly out of the saw.
9. NEVER remove the table insert when the saw is running.
10. To avoid exposure to hazardous dust, do not use this saw without connecting
it to a suitable dust extractor.
11. Always work with a sharp saw blade and feed the work at a rate suited to the
thickness and hardness of the material.
Note: This table saw has been designed and built solely as a woodworking machine.
Do not modify it in any way or use for anything other than its designated
purpose. Neither the manufactures nor the supplies are liable for any damage
or injury caused by incorrect assembly, operation or electrical connection of
this machine.
Important: Risk of Injury!
Never reach into
the running saw blade.

Specification

Table size
Table size with extensions
Table height
Motor (carbon brush)
Blade diameter and bore
Blade rotation speed (no load)
Maximum depth of cut at 90
Cutting width with table extension
Dust extractor hose connection
Noise emission LPA Idle
Weight
Manufacturers Free Warranty
Rating
Rating Description
Hobby: Suitable for Weekend DIY'ers and woodworking enthusiasts.
Generally lighter weight machines with lower power ratings and smaller tooling capacities.
Typically only ever used by one person for short periods of time or longer periods of time
infrequently. Machinery should be well maintained in a clean, dry environment such as a
home workshop, garage or timber shed. Expected maximum use of 100 hours annually.
Please Note: Using a product in excess of its rating will void the manufacturers free
warranty.
o o
/45
4
Wear Eye
Protection
1800W (2.5 hp), 240v single phase
Wear Ear
Protection
440(w) x 660(d) mm
950(w) x 1060 (d) mm
830mm
254mm (10") x 30mm
5700 rpm
75/60mm
450mm (17")
40mm
93.2dB(A)
39 kg
1 year
Hobby