Table of Contents
Advertisement
3.
If a disclaimer displays, click the Continue button. When the connection
attempt is successful, the bottom-left corner of the VZAccess Manager will
read Connected.
4.
In the Windows interface, select Start > Run.
5.
Enter "cmd" in the Open field and click the OK button.
6.
At the prompt, type the command "ipconfig" and press Enter on the
keyboard. Your network device status will display.
7.
Verify that you have obtained an IP Address for your Ethernet adaptor.
8.
Verify that all other Local Area Network Connections display "Media
disconnected" as their status.
Note:
9.
Open a Web browser and navigate to a Web site, such as
<http://www.sonicwall.com/>
data.
Congratulations! You have set up and provisioned your WWAN PC card.
Continue with Connecting for Initial Setup , on page 31.
Page 28
Verizon Wireless PC Card Setup
The name of your Ethernet adaptor may differ from the
screenshot below. Common names for newly acquired cards
are "Local Area Connection 2" or "Local Area Connection 3".
to verify that your connection can transfer
Advertisement
Table of Contents
