Table of Contents
Advertisement
Verifying Your Connection
After the card has been set up on your PC, you can view your connection type
and verify that the WWAN PC card is transferring data.
Alert:
1.
If the Cingular Communications Manager program is running, skip to the
next step. Otherwise, navigate to Start > Programs > Cingular > Cingular
Communications Manager to start the Communications Manager
program.
The WWAN PC card will take a few minutes to connect to the Cingular network.
When the connection is ready, the status will read "Ready: Cingular
Accelerated".
2.
Click the Connect button to enable the network connection.
3.
In the Windows interface, select Start > Run.
4.
Enter "cmd" in the Open field and click the OK button.
5.
At the prompt, type the command "ipconfig" and press Enter on the
keyboard. Your network device status will display.
6.
Verify that you have obtained an IP Address for your Ethernet adaptor.
7.
Verify that all other Local Area Network Connections display "Media
disconnected" as their status.
In order for the connection testing to be valid, it is important
that you first disable all other network connections, such as
a Wi-Fi or LAN connection, before continuing. Leave only your
PC card connection enabled.
SonicWALL TZ 190 Wireless Getting Started Guide
Page 23
Advertisement
Table of Contents
