SonicWALL TZ 190 Wireless User Manual page 28

Verifying Your Connection
After the card has been set up on your PC, you can view your connection type
and verify that the WWAN PC card is transferring data.
Note:
1. If the VZAccess Manager program is running, skip to the next step.
Otherwise, navigate to Start > Programs > Verizon > VZAccess Manager
to start the VZAccess Manager program.
Connect/Disconnect
Button - Click here to
connect or disconnect
from the current
Network Connection
Shows "Verizon
Wireless" when
connected to the
Verizon network.
The WWAN PC card will take a few minutes to connect to the network. When
the connection is ready, the signal indicator will light up green with bars to
indicate connection strength.
2. Click the Connect button to enable the network connection.
In order for the connection testing to be valid, it is important
that you first disable all other network connections, such as a
Wi-Fi or LAN connection, before continuing. Leave only your
PC card connection enabled.
network.
Status - Shows
"connected" when
connected to the
Verizon network.
SonicWALL TZ 190 Wireless Getting Started Guide
Signal - Displays the
signal strength of your
current connection.
Page 27