EverFocus ECOR960 4F2 User Manual page 29

4. Type the user ID and password. Click OK.
Note:
1. The default user ID is admin and the default password is 11111111.
2. If you select more than one DVRs that have the same user ID / password, you will
be able to log in several DVRs at once.
5. To change the IP address, double-click the values in the column and type the numbers or
select an option. Click Set IP Address to save the settings.
Note: Most networks uses DHCP to assign IP address, if you are unsure of your network
settings, please consult your network administrators for configuration details.
6. To access the DVR, highlight the DVR and click Connect to Selected IP. The Internet Explorer
window pops up.
7. Type the user ID and password to log in.
8. When first connecting to the DVR's IP address, the following dialog will appear. Please
check the box and click the Run button to run the EverFocus Viewer application.
Figure 2-19
Figure 2-18
20
ECOR960 4F2 / 8F2 / 16F2