Battery Module; Hsv Controller Cabling; Battery Module Pulled Out; Battery Status Indicators - HP StorageWorks 4400 User Manual

Battery module

Battery modules provide power to the controllers in the enclosure.
1. Green — normal operation LED
Figure 16 Battery module pulled out
Each battery module provides power to the controller directly across from it in the enclosure.
Table 9 Battery status indicators
Status indicator
On left — green
On right — amber

HSV controller cabling

All data cables and power cables attach to the rear of the controller. Adjacent to each data connector
is a two-colored link status indicator.
indicators.
NOTE:
These indicators do not indicate whether there is communication on the link, only whether the link
can transmit and receive data.
The data connections are the interfaces to the disk drive enclosures or loops (depending on your
configuration), the other controller, and the fabric. Fiber optic cables link the controllers to the fabric,
and, if an expansion cabinet is part of the configuration, link the expansion cabinet drive enclosures
Fault indicator
Solid green
Blinking
Off
Solid amber
Blinking amber
Table 5 identifies the status conditions presented by these
HP StorageWorks 4400 Enterprise Virtual Array user guide
2. Amber — fault LED
Description
Normal operation.
Maintenance in progress.
Amber is on or blinking, or the enclosure is
powered down.
Battery failure; no cache hold-up. Green will be
off.
Battery degraded; replace soon. Green will be off.
(Green and amber are not on simultaneously except
for a few seconds after power-up.)
27