Cleaning The Cover; Replacing The Cover; Cleaning The Harness - Britax FRONTIER 90 User Manual

Care and Maintenance

Cleaning the Cover

• HAND WASH the cover using cold water and mild soap.
• LINE DRY to prevent the cover from shrinking.
• DO NOT:
* Bleach
* Machine wash
* Machine dry
* Iron

Cleaning the Harness

• SPONGE CLEAN the harness using warm water and mild soap.
• TOWEL DRY
• DO NOT:
* Disassemble the harness
* Bleach
* Machine wash
* Machine dry
* Iron
Cleaning the Shell
• SPONGE CLEAN the shell using warm water and mild soap.
• TOWEL DRY
• DO NOT use abrasive cleaners.

Replacing the Cover

Pull the elastic bands over the
1
hooks on the bottom of the
child seat shell.
Hook the clips at the front of
2
the seat cover to the bottom of
the child seat shell.
Pull the seat cover forward
3
and push the EZ-Buckle belly
pad through the appropriate
slot in the seat cover. Hook the
clips at the back of the seat
cover to the child seat shell.
42
Fit the cover over the
4
CLICKTIGHT and pull the
elastic band over the hook on
the bottom of the CLICKTIGHT.
Close the CLICKTIGHT.
5
* A click confirms the
CLICKTIGHT is secure.
Fit the side wing cover to the
6
child seat shell and pull the
elastic band over the hook at
the top of the child seat shell.
Repeat for the other side.
Pull the bottom elastic bands
7
over the hooks at the bottom
of each side of the head
restraint.
Fit the head restraint cover
8
over the head restraint and
pull the top elastic bands
over the hooks at the top
of each side of the head
restraint.
Attach the hook and loop
9
fasteners on the head restraint
cover around the harness.
Care and Maintenance
43