Table of Contents
Advertisement
Installation & Setup
Your particular system may differ from the screen shown here. Check
if you have an Ethernet Network Interface card (NIC) installed. If not,
refer to the installation documentation from the NIC card manufacturer
and install the card and drivers.
If your have installed the NIC card,
1. Click the "Add" button. The "Select Network Component
Type" dialog box will open. This box has four options: Client,
Adapter, Protocol, Service.
2. Select Protocol and click the "Add" button. The Select Net-
work Protocol dialog box will open.
3. Select Microsoft in the left scrolling window, then select TCP/
IP on the right, and click "OK". It will return to the N e t w o r k
dialog box.
2-8
Advertisement
Table of Contents
