ISSUE 1.0
• The Sub-Cover can be opened and held in the open position.
5. Align the four holes on the back of the KSU with the four screws installed in the wall.
Screw head
Screw head
6. Slide the KSU into position and tighten the lower two screws.
1.4 Installing the Expansion KSU(s)
1.4.1 General
Each Expansion KSU is connected to the Main KSU individually. The EXIFB-C1 card must be installed
in the Main KSU (1228M-B).
1.4.2 Unpacking (EXIFB-C1)
Unpack the EXIFB-C1 and check it against physical damage.
Items
EXIFB-C1
Hardware Manual
Push to hold
Figure 2-9 Sub-Cover Open Position
Hook
Figure 2-10 Mounting the KSU
Table 2-3 EXIFB-C1 Packing List
List of Contents
EXIFB-C1 PCB
Open
Fasten screws
1
SL1100
QTY
2-7