Two Thread Flatlock Stitch - Bernina 1200DA Owner's Manual

M
ASTERING
Y
OUR
BERNINA
®
• Owner's manual pg.___
• Attach the 2-thread adapter to the upper looper.
• Following the instructions in the Owner's manual thread the serger for a 2-thread flatlock stitch using
®
Jeans Stitch in the lower looper.
• Adjust as indicated on the LCD screen. Fine tune as needed.
• Adjust the stitch length to 2.5mm.
• Fold the fabric in half to 2" x 6" and position it halfway between the left needle and the stitch finger.
Optional: Attach the Right Seam Guide. Move the Right Seam Guide halfway between the needl
and the stitch finger.
• Slowly serge the fabric. The looper threads will extend beyond the fabric on the right side of fold.
• Gently pull the fabric flat
• Return stitch length and thread tension dials to normal.
• Trim and mount the sample.
BERNINA
M Y
ASTERING OUR

TWO THREAD FLATLOCK STITCH

Fabric:
Needle:
Thread:
Presser Foot:
Stitch:
6/01/02
®
BERNINA
Medium weight cotton, 4" x 6"
80/12 Stretch
1 cone of serger thread
1 cone of Jeans Stitch
Standard
#11(wide flatlock) or #12 (narrow flatlock)
®
1200DA/1300DC
®
1200DA/1300DC/64