Serging A Tubular Project - Bernina 1200DA Owner's Manual

M
ASTERING
Y
OUR
BERNINA
®
• Owner's manual pg.___
• Thread the serger for a 4-thread balanced overlock stitch.
• With right sides together, seam the fabric into a tube along the 3" side.
• Press the seam to one side. (The upper looper thread is the right side of the seam.)
• On one 12" side of the tube, cut away a 2" x ¼" section of fabric.
• Lower the presser foot and serge around the tube, cutting off ¼". Stop serging when the knife
enters the cutout; rotate the knife up.
• Continue serging to complete the circle, overlapping the previous stitching by 1".
• Raise the presser foot and rotate the fabric clockwise.
• Lower the presser foot and serge off the edge of the fabric.
• Return the knife to the normal cutting position.
• Trim and mount the sample.
BERNINA
M Y
ASTERING OUR

SERGING A TUBULAR PROJECT

Fabric:
Needle:
Thread:
Presser Foot:
Stitch:
6/01/02
®
BERNINA
Firm cotton, 3" x 12"
80/12 Universal
4 cones of serger thread
Standard
#1 (4-thread overlock stitch)
®
1200DA/1300DC
1200DA/1300DC/16