Turning Tubes - Bernina 1200DA Owner's Manual

M
ASTERING
Y
OUR
BERNINA
®
• Owner's manual pg.___
• Set the serger for a narrow 3-thread seam stitch (right needle)
with the stitch finger retracted.
• Adjust as indicated on the LCD screen. Fine tune as needed.
• Adjust stitch length to 2mm.
• Serge a thread chain several inches longer than the fabric.
• Fold the fabric, right sides together, to 1" x 6" encasing the thread
chain against the fold.
• With the folded edge aligned with the left edge of the presser
foot, serge the tube being careful not to catch the thread chain in
the stitching.
• After stitching the tube, gently pull on the thread chain and turn
the tube right side out.
• Mount the sample.
BERNINA
M Y
ASTERING OUR
BERNINA

TURNING TUBES

Fabric:
Needle:
Thread:
Presser Foot:
Stitch:
6/01/02
®
®
Tricot, 2" x 6"
75 Stretch Ballpoint
3 cones of serger thread
Standard
#7 (narrow 3-thread seam)
1200DA/1300DC
1200DA/1300DC/49