M
ASTERING
Y
OUR
BERNINA
®
• Owner's manual pg.___
• Thread the serger for a four thread overlock stitch.
• Adjust as indicated on the LCD screen. Fine tune as needed.
• Adjust the stitch length to 2.5mm.
• With differential set at N, serge on one 6" edge. If fabric is lightweight enough the edge will
pucker.
• Adjust the differential to 0.7.
• Serge along the other edge, trimming slightly. With a low differential setting, the puckered
edge should be eliminated.
• Mark the differential settings on the fabric sample.
• Trim and mount the sample.
• Return the thread tension settings to normal.
BERNINA
M
Y
ASTERING
OUR
BERNINA
DIFFERENTIAL FEED
Fabrics That Pucker
Fabric:
Needle:
Thread:
Presser Foot:
Stitch:
6/01/02
®
®
1200DA/1300DC
Batiste, 3" x 6"
80/12 Universal
4 cones of serger thread
Standard
#1 (4-thread overlock stitch)
N
0.7
1200DA/1300DC/13