SOYO 82430 VX PCI User Manual page 35

BIOS Setup
A short description of screen items follows:
IDE HDD Block Mode
PCI Slot IDE 2nd
Channel
On-chip Primary PCI
IDE
On-chip Secondary PCI
IDE
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master
PIO
IDE Secondary Slave
PIO
USB Controller
Onboard FDC Controller Enabled: Use the on-board floppy
Onboard Serial Port 1
Onboard Serial Port 2
Choose Enabled (default) or Disabled.
Enabled invokes multi-sector transfer
instead of one sector per transfer. Not all
HDDs support this function.
Choose Enabled (default) or Disabled.
When Enabled is set, IRQ15 is dedicated
for secondary IDE use. When Disabled is
set, IRQ15 is released for other devices.
Enabled: Use the on-board IDE (default)
Disabled: Turn off the on-board IDE
Choose Auto (default) or mode 0~4.
Mode 0 is the slowest speed, and HDD
mode 4 is the fastest speed. For better
performance and stability, we suggest you
use the Auto setting to set the HDD
control timing.
Enabled it when you use USB device.
controller (default).
Disabled: Turn off the on-board floppy
controller.
Choose serial port 1 & 2Õs I/O address.
Do no set port 1 & 2 to the same value
except for Disabled.
COM 1/3F8H
COM 2/2F8H
(default)
| COM3/3E8H
| COM4/2E8H
|
31